Rogue Device Detection
Somebody plugged something in. It might be a helpful desk switch, a personal access point, or a device that should never touch your network. These guides cover what makes a device rogue, alerting on new MAC addresses, and finding rogue access points. They cover using port security as a detection signal. They also include a response procedure that locates the device and talks to the human.
Guides in this topic
- What Makes a Device Rogue (and Why It Matters)Unauthorized, unknown, and malicious devices, the classic rogue types, the risk each creates, and where they show up.
- New-MAC Alerting: Knowing When Something New Plugs InMAC tables, ARP, and DHCP as sources, building the known-device list, alerting per VLAN, and controlling the noise.
- Finding Rogue Access PointsWired-side and wireless-side signals of a rogue AP, controller detection features, walking with a scanner, and cautions.
- Port Security and 802.1X as Detection SignalsViolations, MAC limits, and authentication failures as alertable events — and balancing detection against lockouts.
- Rogue Device Response: From Alert to ResolutionVerify, locate the port and the room, assess intent, isolate, talk to the person, document, and prevent the repeat.
Put this into practice with SysPeep Monitor
SysPeep is network and infrastructure monitoring software for Windows. It discovers the devices on your network, polls their health and performance over SNMP and WMI, and alerts you the moment something goes wrong — all from one web console.
Download Free TrialLearn About SysPeep