Home › Topics › Jitter & Real-Time Traffic

Jitter & Real-Time Traffic

Voice and video care less about speed and more about consistency. These guides explain jitter — the variation in packet arrival times. They show how jitter buffers hide it until they can't, and what targets to aim for. They also cover how to protect real-time traffic with basic QoS.

Guides in this topic

  1. Jitter Explained: Why Variation Hurts More Than DelayThe mechanics of arrival-time variation, with a visual walkthrough of a voice stream falling apart.
  2. How Jitter Buffers Work — and What Happens When They Give UpFixed versus adaptive buffers and the trade-off triangle of delay, loss, and quality.
  3. Measuring Jitter ProperlyThe standard calculations, why averages hide the problem, and tools that measure jitter credibly.
  4. Jitter Targets by Workload: VoIP, Video, Remote DesktopDefensible thresholds, what happens past them, and how to test against them.
  5. Diagnosing Jitter SourcesCongestion bursts, Wi-Fi contention, duplex problems, overloaded gear — an isolation sequence.
  6. A Starter QoS Design for Real-Time TrafficClassification, marking, and queuing that a generalist can deploy in an afternoon.
  7. From Network Metrics to MOS: How Call-Quality Scores WorkConverting measured loss, latency, and jitter into the quality score users would report.

Quick answers about jitter


What is a jitter test, and how do I run one on an internet connection?

Send a stream of packets at a fixed interval and measure how much the arrival interval varies; a packet train between two probes does this continuously across a real path, and a one-off test from a web page does it once from your browser. Internet connection jitter under 10 ms is fine for voice; above 30 ms calls start to break up.


How do I reduce jitter on Wi-Fi and on the network?

Jitter is queueing that varies, so the fixes are the queueing fixes: QoS that puts voice and video in a priority class, less contention on the Wi-Fi channel, and no saturated link on the path. Wired beats wireless for anything real-time, and the guides above cover the rest.


How do I fix latency variation on voice and video calls?

Measure jitter per path, mark the real-time traffic with the right DSCP class, confirm the class is honoured at every hop with the QoS counters, and remove the one saturated link the measurement points at. A jitter buffer at the receiver hides a little; it cannot hide a congested uplink.


What causes jitter on an internet connection, and what is the difference between jitter and latency?

Latency is the delay; jitter is how much the delay changes from packet to packet. Jitter on an internet connection comes from queues that fill and drain, from Wi-Fi retries and from paths that change mid-call, and it is the reason a call with fine average latency still breaks up.


Put this into practice with SysPeep Monitor

SysPeep is network and infrastructure monitoring software for Windows. It discovers the devices on your network, polls their health and performance over SNMP and WMI, and alerts you the moment something goes wrong — all from one web console.

Download Free TrialLearn About SysPeep